Help for Order Form
Please go to the corresponding
number from the order form for guidance...
1. Print your name and address you want the new
System sent to. Reference refers to who is going to wear this system ?
2. Write a daytime phone number you can be reached
at including area code.
3. Men's and women's Systems are generally (but not
always) made differently. Men usually use a tape tab on the front, women
usually don't. Women are usually able to utilize what hair they have by
integrating it up through holes in the System.
Base
Type: There are
several to choose from. These are the most common.
#1 is an M-Mesh (Fine mono) base
with a scalloped front and a 3/4" clear poly skin perimeter, used
for either daily or extended wear.
#2 is an M-Mesh (Fine mono) base with
underventing, and a 1" poly coated perimeter, used for either daily
or extended wear.
#3 is a replaceable French lace
front (our most natural looking front hairline) with 1/2" P.U.
coated behind lace (this makes the lace replaceable), M-Mesh (Fine mono)
for the base behind the lace and a 1" poly coat around the sides
and back. This may also be used for daily or extended wear.
#4 This base is the same as #3 except the
replaceable front is fine welded mono, which is a little more sturdy,
though not as soft to the touch as French lace
#5 This base (mostly used by women) is an
integration system made with monofilament line. It's purpose is to
enhance the hair you already have by integrating your own hair into the
system. You can get the holes in any size depending on how much of your
own hair you have to pull through. This system can be attached using
clips for daily wear or sewn in for extended wear.
#6 This is a full wig. This system
can be used for either a man or a woman. It is used mostly for daily
wear. For an extended wear full wig. We suggest using an M-Mesh base
with a clear polyskin perimeter (see example #1 or #2).
4. Our Synthetic hair is made of Kanekalon and
Toupelon. Our 100% Human Hair is made of the finest Indian hair
available. You can request 100% of one or the other or a mixture of
both. Grey hair is most always synthetic. We can use Yak (animal for
human grey).
5. The easiest
thing to do is send us an old system that fits properly. We will use the
same base measurement and return it with your new System. If that is not
an option then do either a Measurement or Tape
Template below:
Measurement
For men: A) Place three to four fingers above the eyebrows
and locate with a pen dot the beginning of the natural
hairline.
B) Measure from that point backwards to the beginning of the
present hairline. For extended wear users measure 1/4
- 1/2 inch further back into the present hairline so system
will be large enough to attach to your own hair.
C) Measure from the beginning hairline (side to side) across
top of the head. For extended wear users measure 1/4 -
1/2 inch further down each side of the present hairline so
system will be large enough to attach to your own hair.
For women: Side measurement is done like men's above. However,
front to back is different. Because women typically thin in
front but don't recede like men do, it is wise to use the
natural bang and add hair behind it. (Some men may choose to
do this technique also). Start your measurement about 1 inch
behind natural front hairline, going over the top to back as
far as it needs to cover the thin area. |
To
Make a Tape Template
   
Printable
Simple
Instructions
(1). Stretch Saran plastic wrap over persons head. Twist at
sides and have the person hold down firmly.
(2). Run clear see through Packing tape strips from front to
back and from side to side - overlapping to form a solid cap.
Four layers are usually enough.
(3). Draw (using a permanent marker) the exact outline of the
hairpiece size you want, front recession lines, part placement
(if any), hair direction, exactly as you want them on the
finished hairpiece. (Use guidelines in Measurements
above to help with determining size)
(4). Remove template from persons head and cut off excess tape
around edges.
Call us if you have any questions regarding making
a template or you may want to see our
instructional
VHS video.
|
6. Left,
right, center partings are for definite parts. If you wish to part on
either side or use no part choose Multi-directional.
7.
Take sample
from crown or back. Scotch tape around end of sample. Please write down
what part of the head your sample is coming from. If your sides are more
Grey, clip a sample. Be sure to identify this for sides only. Grey hair
is offered in synthetic or Yak.
8. Curl size
in millimeters is determined by professional perm rod used. See diagram
below.
9.
Extra Light density is 60% thickness of an average head of hair.
Light density is 80% thickness of an average head of
hair.
Light to Medium Density is considered 90% thickness of
an average head of hair .
Medium Density is considered 100% thickness of an
average head of hair (This is considered normal).
Medium to Heavy Density is considered 120% thickness of
an average head of hair (This is thick).
Heavy Density is 150% thickness of an average head of
hair (This is very very thick).
10.
If you want anything different than System Special features, list them
here. System features (unless otherwise requested) include:
*Regular Indian Human Hair. Grey is synthetic.
* Base material on men's System is M-Mesh with 3/4 inch Polyurethane see
through tab perimeter. Front tab is 3/4 inch glass silk with scallop
front edge. Lace front may be requested. To learn more about scallop
front and lace front click here.
* Base material on Women's Integration System is 1/2 inch Braided
Monofilament (fish type net) and 1/4 inch M-Mesh Ribbon around perimeter
for weave attachment.Can also be used with clips
* Average length on all Systems are 4-6
inches. If you want longer length than 8 inches, please add $40.00 for
every 2 inches. Example: 10 inches long is $40.00 more. 12 inches is
$80.00 more and so on.
Matching tape
tab #('s)
| If you would like tape tabs with this order, specify by
letter(s) which kind of tape you prefer. Each letter you
choose comes with 5 bags of tape for only $20.00. Enter letters and total on order form. |
 
Frontal tape tab
A. Brown liner-Opaque
B. Red Tack-Transparent
C. White liner-Transparent |
Rolls-for
daily or extended wear 3/4" x 108"
D. Brown liner-Opaque
E. Red Tack-Transparent
F. White liner-Transparent |
We also have Hair Replacements Lacestik Tape in frontal or Straight-
Shop
online for a wide variety of tapes adhesives, etc.
NOTE: Women's systems don't generally
use tape tabs on integration units. Any questions you may have about
your desires on a custom hair system are welcome. We are here to help
you place your order.
The following
is a detailed description of the most popular system fronts on the
market today.
 Scallop
Front - This is a thin clear skin like Polyurethane
material designed to be slightly wavy along the hairline giving a
realistic appearance. This type of front lasts the longest. Density
(thickness) can be whatever you choose. Scallop front is attached
using a tape tab. Underventing (hair coming from the underneath side
side of unit) cannot be done with a scallop or lace fronts. It would
show too heavy of a solid line. Underventing is done on the front
hairlines that go in a straight line, but this is an older method
for fronts.
Lace
Front - This is the newest rage in modern hair
replacements. A very thin French Lace or Welded Mono Lace is placed
on the front of the unit from temple to temple and back about
2"-3" or so for a replaceable front or the entire unit can
be made with this material making it a disposable unit.. The lace is invisible to the eye and hair
appears to be growing from the scalp, even with up close scrutiny.
Density in lace works best choosing 'light to medium', at least in
lace area only. The back of the system is made the same way as
before, with tape tab perimeter or as desired. The lace front is attached
to the scalp with a
special lace tape or adhesives (see
price page) applied to the skin in lace area only.
Then the system lays down on top of adhesive, no tape is required in
front. This lace front is designed to be replaceable because it is
very fragile. The client must treat it very gently. Even still, most
people can only go up to about 6 months before needing a repair. It
really is not as expensive as you might think to maintain. It is
recommended to purchase two systems at a time. When one unit needs a
new lace front put on, send it to us. We place a 4-5 week priority
rush on repair. The unit comes back cleaned, totally revented (more hair
put in all over), with a whole new Lace front. It looks like a brand
new system. For the best system on the market and the most real
looking, you can't beat our repair price of only $150.00 + $50.00 to
replace lace front. And you can
replace the front as many times as you want until the rest of the
system is totally worn out!
Hair Replacements Home / Hands on Hair
Replacement Training Free 30 day Trial on 98 minute DVD
| 
